Works with any phone or device capable of transmitting the Bluetooth stereo (A2DP) protocol. Streams up to 33 feet away for up to 12 hours on a full charge - works as it charges. Charge via the built-in lithium-ion rechargeable battery with the included USB charging cable. Plug and Play - no driver or software needed.

How do I connect to aluratek?

How to pair - AIS03F

1. Plug the unit into a dock. ...
2. Hold the button on the side of the unit until the LED light starts to blink rapidly.
3. Go to the bluetooth settings on your phone, tablet, or other bluetooth enabled media player and search for the device.
4. Select AIS03F from the list and make the connection.

How do I connect my Aluratek Bluetooth transmitter to my TV?

Bluetooth Enable Your TV

Connect the transmitter directly to your TV or to your home stereo receiver (RCA OUT ports) using the included RCA-Y cable to transmit audio from your favorite program or sporting event to your Bluetooth headphones.

How do I pair my Bose headphones with aluratek?

With the transmitter off, press and hold the power button until you see the red and blue lights flash. Once the red and blue lights are flashing, put your receiver i.e. headset or speaker into pairing mode. They will then find each other and pair with each other.

Will a Bluetooth transmitter work with earbuds?

Many Bluetooth transmitters can serve as Bluetooth receivers as well (we'll go more into detail about transmitters and receivers later). Although all Bluetooth transmitters can transfer audio to your headphones or speakers, some of them can also receive audio from your device to headphones or speakers.

Aluratek Video Review

38 related questions found

How do I connect my aluratek to my iPhone?

1-2 of 2 Answers

1. Make sure AIS01F is turned Off. Activate AIS01F pairing mode by press and hold the power button for 6-7 seconds. ...
2. On your iPhone, go to Settings|Bluetooth and slide it to the ON position. Next go to the Aluratek and press and hold the power button down until the LED flashes blue-red.

How do Bluetooth transmitters work?

Bluetooth transmitters provide a solution to that problem, essentially adding Bluetooth to devices that lack it. They connect to the source via an audio cable and wirelessly broadcast the audio to your headphones or even to a Bluetooth speaker.

Can Bluetooth receive and transmit at the same time?

It is possible to find Bluetooth devices that are able to receive and transmit information and data at the same time. ... This applies to Bluetooth devices that are able to receive information, such as music, and also to record sounds from a microphone headset and transmit them through to a smartphone device.

Can I connect 4 Bluetooth speakers together?

To get audio to multiple speakers, use an app such as AmpMe, Bose Connect, or a few from Ultimate Ears, as well as Bluetooth 5, which send audio to two devices at once. Instructions in this article apply to Bluetooth speakers connected to Android, Amazon Echo, or Google Home devices.

How do you pair aluratek ABT05F?

Make sure ABT05F is turned off 2. Activate your device's Bluetooth function and set your device to search for Bluetooth device. 3. Slide power button to ON side,blue LED light flashes once (When ABT05F is powered on, it will enter pairing mode directly if there is no pairing record.)

How do I charge my Aluratek Bluetooth?

Connect the larger USB end of the cable provided to your PC or USB power adapter (not included). Plug the smaller Micro USB to the charging port of AIS01F. The red LED will be on while charging. Please charge the battery for a minimum of 3 hours.

How do I connect my Aluratek Bluetooth cassette?

Activate ABCT01F pairing mode by press and hold the power button for 6-7 seconds. 3. Activate your device's Bluetooth function and set your device to search for Bluetooth devices. Select ABCT01F when it is found.

How do I reset my Aluratek?

Resetting the ABT05F

1. Press and hold the pairing button.
2. While holding the pairing button, connect the USB charging cable to power (either a power adapter or computer)
3. Release the pairing button when the red and blue LED lights start flashing.
4. The transmitter is now reset and ready to pair again.

What is the strongest Bluetooth transmitter?

Best Bluetooth transmitter 2021: stream in your home and car

• TaoTronics. Bluetooth Transmitter.
• Avantree. Oasis LONG RANGE Bluetooth Transmitter and Receiver.
• Nulaxy. Wireless In-Car Bluetooth FM Transmitter.
• Avantree. Dual Link Bluetooth 4.2 Transmitter.
• Trond. Bluetooth V4. 1 Transmitter.

Do Bluetooth transmitters drain car battery?

If you leave it plugged in and remove you key from ignition and the light on the transmitter stays on then yes it will drain your battery.

What is the difference between Bluetooth receiver and transmitter?

A Bluetooth transmitter is used to connect a non-Bluetooth device with a Bluetooth enabled device. ... A Bluetooth receiver is used to connect a Bluetooth device to a non-Bluetooth device. For example, you can connect your phone with the Bluetooth receiver of the audio speakers.

Does aluratek work with iPhone?

Aluratek's Dual Lightning Adapter for iPhone/iPad is the best solution to charge your phone, and listen to music or talk on your phone simultaneously. It is compatible with any iPhone or iPad with a lightning port. No extra software is required.

How do I email a photo to aluratek?

Now you can send photos directly to the wifi digital photo frame via email. All you have to do is email photos to your wifi frame's “Email Address” and they will instantly show up.

How many headphones can connect to Bluetooth transmitter?

Each transmitter can connect up to TWO pairs or Bluetooth headphones, so two transmitters can connect up to FOUR pairs… this chain can theoretically go on and on and on… and connect however many Bluetooth headphones as you want.

How can I listen to TV through headphones?

If your TV has a 3.5mm headphone jack, just plug your wired headphones into it. If your TV doesn't have a 3.5mm jack, but has RCA stereo outputs, get an RCA-to-3.5mm adapter and use your headphones that way. The obvious problem here is that you need a really long wire to listen a comfortable distance away from your TV.