Cumaru hardwood has a Janka hardness of 3,340 and Ipe has a hardness of 3,680. The Janka hardness test is the so-called “high heel test”. A . 444” steel ball is placed under enough pressure to imbed it halfway into a piece of wood.

How strong is Cumaru wood?

Color varies from a golden tan to a reddish brown with some dark grain accents throughout the wood. This wood has a bending strength of 14,793 psi.

Is Cumaru a good wood?

Rot Resistance: Cumaru has excellent durability and weathering properties. The wood is rated as very durable regarding decay resistance, with good resistance to termites and other dry-wood borers. Workability: Tends to be difficult to work on account of its density and interlocked grain.

Does Cumaru scratch?

Again, leaving your Cumaru unoiled or oiled won't have any effect on the structural integrity of your deck's boards, as Cumaru is naturally mildew, mold and insect resistant and won't splinter or scratch easily. Installing a Cumaru deck is a perfect way of increasing your property's value.

Is Cumaru good for flooring?

Cumaru flooring is the perfect choice for a hardwood floor because of its density, Cumaru floors in solid or engineered formats are very resistant to termites and decay. ... The wood's Janka hardness is rated as 3,200, making a Cumaru floor approximately 270% harder than a Red Oak floor.

Solid Cumaru Flooring Review

26 related questions found

Does Cumaru darken?

Like many exotic hardwood species, Cumaru is likely to change color over time. This is due to it being a species prone to photosensitivity. This means that Cumaru reacts to sunlight, which turns its color range slightly darker over time.

How do you clean a Cumaru floor?

Sweep and vacuum regularly. Clean as needed with a quality no wax wood floor cleaner. Do NOT damp mop or use any furniture cleaner on your floor. Use chair pads to prevent scratching.

How long does Cumaru wood last?

Color varies from a golden tan to a reddish brown with some dark grain accents through out the wood. Very durable and naturally resistant to decay and insects. Offers up to 50+ year lifespan.

Is Cumaru as hard as Ipe?

Cumaru hardwood has a Janka hardness of 3,340 and Ipe has a hardness of 3,680. ... Ipe and Cumaru are so amazingly hard, it takes over 3,000 lbs of pressure per square inch to make this happen!

How do you finish a Cumaru?

Cumaru is a very hard exotic wood. There are a couple of ways to go when finishing these floors. One is using a tung oil type floor finish. This will penetrate the wood more so than surface coatings and should not pose an adhesion problem.

What is the hardest wood in the world?

1. Australian Buloke – 5,060 IBF. An ironwood tree that is native to Australia, this wood comes from a species of tree occurring across most of Eastern and Southern Australia. Known as the hardest wood in the world, this particular type has a Janka hardness of 5,060 lbf.

Is Cumaru a hardwood or softwood?

Cumaru, also known as Brazilian Teak, is an excellent hardwood that many have never heard of. Its botanical name is Dipteryx Odorata, and is primarily found in the Northern regions of South America.

Is Cumaru fire resistant?

Both Ipe and Cumaru hardwoods are rated for fire-resistance, but their Batu wood decking stands out from the rest due to its Class A fire rating. The Batu fire-retardant rating also exceeds that of other softwoods as much as five times over, making it an incredibly durable option.

Can you paint cumaru?

Exotic hardwoods (including ipe and its friends: cumaru, tigerwood, etc.) are not like most woods. Paint won't stick to them! ... These oils repel the paint, much like how the oil on a duck's feathers repels water.

What is cumaru hardwood?

Cumaru is a responsibly harvested high-density hardwood species that grows throughout the northern portions of South America. Due to its beautiful graining and varied appearance, Cumaru, pronounced /Koo'-mah-Roo/, is often referred to as "Brazilian Teak".

What tree does Tiger wood come from?

When someone uses the term “tigerwood'' they may be referring to Coula edulis, a tree species from tropical western Africa, Lovoa trichilioides (also African in origin), or Goncalo alves from South America (primarily Brazil). These are all evergreen varieties that prefer tropical or subtropical growing conditions.

Is Cumaru cheaper than ipe?

While our price for 1×6 Cumaru is $2.15 per linear foot. That makes Cumaru nearly 36% cheaper than Ipe wood.

How do you maintain a Cumaru deck?

1. Advice for Ipe, Garapa, and Cumaru Decks. ...
2. Install Your Deck Properly. ...
3. Pre-finish Your Hardwood Lumber. ...
4. Refinish Periodically to Maintain Color. ...
5. Clean Your Hardwood Decking Regularly. ...
6. Give Your Deck a Deep Clean. ...
7. Pressure Wash with Caution. ...
8. Fix Any Loose Fasteners, Screws or Nails Right Away.

Is black locust good for decking?

Unlike the tropical hardwoods, Black Locust Lumber decking provides a much higher slip resistance than that of the more oily Ipe and other tropical hardwoods. This makes Black Locust decking an ideal choice around pools and docks which will assist in decreasing slip and fall hazards in those areas.

Does Cumaru need to be sealed?

Our Cumaru decking is shipped with the end grain sealed with a clear wax to prevent any end checking and adverse movement. Fresh cuts should be sealed within 24hrs with end grain sealant. ... The end grain sealant is simply applied with a paintbrush and dries clear. DO NOT apply end seal to the surface of the decking.

Is Cumaru the same as teak?

Cumaru, also known as Brazilian Teak or Golden Teak, is a naturally durable Brazilian timber with a density similar to Ipe. Its consistent golden brown color and moderate cost make it an attractive alternate to more expensive hardwoods such as Teak or Ipe.

Is Brazilian teak good for flooring?

Teak is one of the most durable wood flooring options around. With a Janka Hardness Rating of 3540, teak is harder than oak, pecan, and even walnut! As such, it's an amazingly scratch-resistant flooring choice.

How do you get scratches out of Brazilian cherry hardwood floor?

Mix equal parts olive oil and vinegar, which work together to remove dirt, moisturize, and shine wood. Pour a little directly onto the scratch. Let the polish soak in for 24 hours, then wipe off. Repeat until the scratch disappears.

Can you stain cumaru wood?

If you appreciate the natural appearance of this wood species and have no plans to apply an oil finish in the future, this characteristic poses no problem. In fact, the oily property of Cumaru helps to maintain an attractive, stain-free finish throughout the life of your flooring.

What color is Brazilian teak?

Color: Before exposure to UV light, Brazilian teak is a reddish brown or purple brown color, with yellowish brown or purple streaks in it. After exposure, it will be a light brown in color or yellow brown throughout. Grain: The Brazilian Teak grain is fine, interlocked, and has an oily or waxy feel.