Should I Re-Blue or Re-Finish My Gun? The short answer is no. If it's your intent to maintain a firearm's collectibility and value, the answer is usually “no”; don't re-blue your gun. ... A firearm that shows a little wear with it's original finish is more valuable than one that has been refinished (re-blued).

Should you restore an old gun?

If you have an old gun that you want to hunt with, there's nothing wrong with having it refurbished—just don't expect to get the money you spend on the gun out of it if you ever sell it. The point of refurbishing is to put a gun into condition where it's safe and makes you happy to take into the field or to the range.

Should you clean an antique gun?

Without the smallest amount of moisture, dust gets pushed around and won't actually be picked up. Once you've successfully removed dust, be sure to dry any moisture left behind with a clean, very fine cloth. This is the absolute most you should ever do to clean your antique firearm.

Can you Cerakote a used gun?

It can be applied to practically all materials used in firearm construction, whether it's steel, aluminum or plastics/polymers. While NIC Industries does not do any application work itself, you can check its website to find a local Cerakote-certified applicator.

Does Rebluing a gun hurt the value?

Rebluing only decreases the value. Rebluing a $500 gun, if you try to sell it, you'd likely still get $500 out of it, if not less. You would not make your money back.

How to Rust Blue a Rifle Presented by Larry Potterfield | MidwayUSA Gunsmithing

37 related questions found

Is parkerizing better than bluing?

Parkerizing is commonly used on firearms as a more effective alternative to bluing, which is an earlier-developed chemical conversion coating. It is also used extensively on automobiles to protect unfinished metal parts from corrosion. ... Passivation can be used for protecting other metals.

How much are antique guns worth?

Just because a gun is old doesn't necessarily make it valuable. In reality, most older, mass-manufactured guns are actually worth much less than a brand-new model. For example, if the gun you obtained is a Mossberg 500 made anytime in the 1960s to 2020, it's worth approximately $75 to $300, depending on its condition.

Is Cerakote bad for your gun?

Much like most paints, cerakote is applied with a spray gun of sorts. And yes, it is toxic, so protective equipment must be worn. You know, like, blindness or permanent nerve damage toxic — protection isn't optional.

Is it good to Cerakote a gun?

This gun coating is part sealant, part finish — perfect for extending the longevity of your firearm. ... Cerakote is a great option because not only is it water-proof and able to fully protect a firearm, it is also available in a myriad of finishes to create anything from a bold to subtle look.

Does Cerakote wear off?

As far as wear, it's natural for items to wear due to heat and friction. Cerakote isn't the cure-all, end-all solution but it will last if it is properly taken care of. ... It helps reduce friction and prolong your Cerakote finish.

Do guns lose their value?

Is there a trend for depreciation, or appreciation, of firearms? Generally speaking, firearms will lose some of their value over time. However, when they reach antique status, the price will climb again. While the value of a gun may depreciate over time, it doesn't lose as much value as goods in other industries.

Should I oil the outside of my gun?

Do not lubricate the bore using gun oil! For long term storage only, the bore can be treated with a heavier lubricant such as Barricade (or equivalent). This must be removed by cleaning the barrel prior to shooting the firearm! Clean the exterior of the barrel, barrel hood, barrel lug, and the feed ramp.

How much does a Turnbull restoration cost?

Turnbull is the best for restoration but may cost you $2000-$3000.

Is Cerakote permanent?

Cerakote requires many hours of prep, spray, and cure time before the firearm can be used. It is a permanent application that cannot be reversed so easily but will endure a long time.

Does Cerakote scratch easily?

Cerakote® is a ceramic polymer based proprietary formulation that offers industry-leading durability, hardness, scratch resistance, corrosion resistance, flexibility, heat, and chemical resistance.

What's better DuraCoat or Cerakote?

DuraCoat – Weighing Your Options For the Best Firearm Finish. ... Cured Cerakote absolutely beats cured DuraCoat in every measurable respect with regard to finish quality, abrasion resistance, and overall toughness.

How long is Cerakote good for?

Details for Cerakote Storage

We warranty all Cerakote products for 12 months from the date of shipment.

Does Cerakote prevent rust?

Cerakote is also a more effective barrier against oxidation and corrosion than bluing.

Does the military use Cerakote?

Red Creek Tactical Cerakote

Cerakote is one of the toughest coatings you can put on a firearm. It is currently used on a number of production pistols as well as many custom firearms. Military and law enforcement versions even have protection against IR detections.

How old does a gun have to be before it's considered an antique?

Under the United States Gun Control Act of 1968, any cartridge firearm made in or before 1898 ("pre-1899") is classified as an "antique", and is generally outside of Federal jurisdiction, as administered and enforced by the Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE).

What can you do with old guns?

How to Dispose of Guns and Ammunition

• Call the police. Your first and best option is to check with your local precinct. ...
• Get cash or credit. Take your gun to a gun buyback event. ...
• Donate. ...
• Go to a special collection event. ...
• Turn your gun into a commemorative plaque.

What guns are worth a lot of money?

These 9 Vintage Guns Are Worth Way More Than You Think

• Parker Shotgun. If you own a Parker, you hit the jackpot right off the bat. ...
• M-1 Paratrooper. ...
• Luger. ...
• Nambu. ...
• Sharps 1863 Carbine. ...
• Winchester 1873. ...
• Colt M1911. ...
• M1-Garand.

What is a Parkerized finish?

Parkerizing is the process of protecting ferrous metals from corrosion and wear by applying a chemical phosphate coating. Parkerizing is an excellent gun coating in its own right and it also makes a perfect base for our DuraCoat® Firearm Finish!