"Horst Link" suspension is a type of four-bar linkage suspension. It is characterized by having both connecting links pivot on the seat tube, with the lower pivot located above the center of the bottom bracket, and the rear axle being located higher than the pivot connecting floating link and lower connecting link.

How does a Horst link work?

Horst-link Suspension

With the addition of a pivot on the chainstay, Horst-link bikes have a modified axle path rotating around an instant centre that changes position through the travel, allowing anti-squat and anti-rise to be optimised in different stages of the travel.

What bikes use DW Link?

Currently the DW-link has been licensed to the following bicycle companies: PIVOT Cycles, Ibis, Independent Fabrication, Turner Suspension Bicycles, and Iron Horse Bicycles.

What is Antirise?

Essentially the opposite of anti-squat, a bike's anti-rise value denotes how much it resists the rear-end rise that occurs when we hit the brakes. ... This term is used to note the sensation of less active suspension under heavy braking.

What is mountain bike linkage?

Linkages, shown in green, are used to connect to the shock. This is sometimes known as a “faux bar” design because while it utilizes a system of linkages like a traditional four-bar design, there is still just a single pivot point. ... Evil Bikes utilize a linkage-driven single pivot design as well.

Scott RANSOM FOUR BAR LINKAGE Suspension REVIEW

18 related questions found

What is a Horst link suspension?

"Horst Link" suspension is a type of four-bar linkage suspension. It is characterized by having both connecting links pivot on the seat tube, with the lower pivot located above the center of the bottom bracket, and the rear axle being located higher than the pivot connecting floating link and lower connecting link.

What is a linkage on a bike?

Instead of bolting the shock directly to the swingarm, a linkage system consists of a pair of levers or two, and other parts that connect the shock to the swingarm.

What does anti squat do?

What is Anti-Squat? Anti-Squat is best described as Caster for the rear wheels…it changes the relation of the inner hinge pins parallel to the ground. The more anti-squat the vehicle has, the less the suspension will squat during acceleration. ... Adding Anti-Squat will make the car Squat less during acceleration.

What is anti squat bike?

The chain-force pulls on the rear-suspension, extending it and lifting the rider. Anti-squat is the term describing the amount the suspension reacts to the chain force. ... 100% anti-squat means that the chain-force counteracts the mass-transfer exactly, and so the bike will not squat into its travel.

What is anti squat on a 4 link?

Anti-Squat is an engineering term which describes the 4-Links likely performance under acceleration. 4-Link settings with less than 100% Anti-Squat are likely to squat under hard acceleration (rear of car drops), and "hit the tires more softly".

Why is DW-link so good?

The dw-link suspension design allows us to achieve the ultimate ride. The perfect balance of traction, acceleration, square edge bump performance, superior braking, and the ability to handle big hits with ease is what Pivot bikes are known for.

What is Split Pivot suspension?

Split Pivot is a patented suspension system for high performance bicycles, where traction, efficiency, maneuverability, and frame stiffness are important factors on the track and trail. ... The system reduces excess suspension reaction to acceleration forces, and at the same time reduces excess reaction to braking forces.

Which MTB suspension is best?

Best mountain bike forks:

• RockShox SID Ultimate.
• RockShox Pike Ultimate.
• Fox Float 38 Performance Elite.
• Marzocchi Bomber Z2.
• Cane Creek Helm Air MKII.
• Fox 36 Factory GRIP2.
• RockShox Lyrik RC2.
• RockShox Zeb Ultimate.

How important is front suspension on a bike?

Advantages of suspension:

Better control of the bicycle – better traction when cornering, even braking. This allows for faster riding on rough roads that are downhill, or flat.

Do coil springs wear out MTB?

Yes coil springs sag over time

Springs loose tension over time and start to get shorter once that starts to happen its time to replace it. This would sound like a Material failure because the Springs on a MTB are not that stressed, and should last a long time.

What is dual suspension?

A bike with just front suspension (a suspension fork) is referred to as a hardtail, a bike with both front and rear suspension is referred to as a dual-suspension, or full-suspension bike and a bike without any suspension at all is known as a rigid mountain bike.

What is a kickback bicycle?

Pedal-Kickback means the result of chain growth rotating the cranks backwards during suspension compress. Pedal-Kickback effect is a byproduct of anti-squat characteristics of the suspension. When bicycle is designed to use AS the swing arm is on a different axle than the cranks.

What is pedal bobbing?

What is Pedal bob? Every time you push down on the pedals, the bike accelerates. This acceleration causes the rider's weight to shift backwards and compress the rear suspension — just like in an accelerating car. This happens with every pedal stroke, so the bike oscillates, or bobs, as you pedal.

How do I add anti squats?

By raising the front of the hingepin or lowering the rear, you are increasing the degrees of anti-squat. Typically, changes are made by either swapping out the rear suspension hingepin mount or by inserting shims under the front or rear of the mount before tightening down the mounting screws.

How do you set a droop on an RC car?

Put your car down on a flat surface and let the suspension settle; this is your car's ride height. Now, slowly lift up on your car's chassis until the wheels just begin to leave the ground; the distance your suspension is able to extend downwards before the wheels leave the ground is the droop value.

Is PDS better than linkage?

Linkage is best for moto and cross-country racing where high speed hits are common. PDS is better for most other riding for its smooth ride and ability to handle low speed impacts. The “high/low” speed refers to shock piston speed, not necessarily bike speed.

What is dirt bike linkage?

Linkage helps with the progressivity of the rear shock. It helps make it softer at the beginning of the stroke to soak up smaller bumps, but makes it stiffer at the top of the stroke to be able to handle the bigger hits.